Shower Installation in Etobicoke, ON

Upgrading or adding a shower is one of the most rewarding improvements you can make to a bathroom, but it is also one of the easiest to get wrong. A shower that is installed without proper waterproofing, drainage, or attention to local code can lead to leaks, water damage, and costly do-overs. That is why so many Etobicoke homeowners turn to professionals for shower installation in Etobicoke, ON — to get it done right the first time, with clean results that last for years. At Waterworks Plumbing & Drains, we handle every part of the job, from planning and plumbing to the final fixtures.

Whether you are replacing an old, tired stall, converting a tub into a sleek walk-in, or building a brand-new shower from scratch, our team brings the plumbing expertise and careful workmanship the job demands. We help you choose the right setup for your space, your needs, and your budget — and we install it to a standard you can count on.

Our Shower Installation Services in Etobicoke

Every bathroom is different, and so is every shower project. We offer a full range of installation services for homes across Etobicoke.

Walk-In Shower Installation

Walk-in showers are popular for good reason — they are open, easy to clean, accessible, and give a bathroom a modern, spacious feel. We install walk-in showers of all sizes, handling the plumbing, drainage, and fixtures so your new shower performs as good as it looks.

Tub-to-Shower Conversion

If you rarely use your bathtub and want more functional space, a tub-to-shower conversion is an excellent upgrade. We remove the old tub and install a new shower in its place, reworking the plumbing and drainage as needed for a seamless result. If you are weighing your options, we also handle full bathtub installation — so whether you want to keep a tub or switch to a shower, we can guide you to the right choice.

Custom Shower Installation

For homeowners who want something tailored to their space, we install custom showers built around your layout and style. From the shower base and valve to the fixtures and finishes, we make sure every element is installed properly and works together.

Shower Valve and Fixture Installation

The valve and fixtures are where you interact with your shower every day. We install showerheads, valves, and controls correctly so you get reliable water flow, steady temperature, and leak-free performance from day one.

What to Expect During Your Shower Installation

A quality installation is about more than just the final fixtures — it is about everything that happens behind the walls. Here is how we approach the job:

1. Planning and assessment — We evaluate your space, discuss your goals, and recommend the right shower type and layout for your bathroom.
2. Plumbing and drainage — We set up or modify the supply lines and drain so water flows in and out exactly as it should.
3. Waterproofing — Proper waterproofing is critical to preventing leaks and hidden moisture damage, and we never cut corners here.
4. Installation — We install the shower base, walls, valve, and fixtures with precision and care.
5. Testing — Before we finish, we test the system to confirm everything drains, seals, and performs correctly.

Because a shower involves plumbing, drainage, and waterproofing all working together, professional installation protects your home from the kind of slow, hidden damage that DIY projects often cause.

Planning Your Shower: Code and Layout Considerations

A well-planned shower is not just about looks — it has to meet local building and electrical code and leave enough room to be used comfortably and safely. These are a few of the considerations that come up most often. Keep in mind that exact requirements depend on your specific layout and your local building department, so always confirm with the authority that issues your permit.

Electrical Safety Around Your Shower

In Canada, electrical code is strict about keeping switches and receptacles away from water. Under the Canadian Electrical Code, light switches generally must be located at least 1 metre (measured horizontally) from a bathtub or shower stall. Where that distance is not practicable, the switch may be placed no closer than 500 mm and must be protected by a Class A ground fault circuit interrupter (GFCI). This is why you will often see bathroom light switches placed near the door or even just outside the bathroom in Canadian homes. When we plan a new shower, we keep these clearances in mind so your layout stays safe and code-compliant.

Clearances Between Your Shower, Toilet, and Other Fixtures

Spacing between fixtures matters for both comfort and code. As a widely applied guideline, a toilet should have at least 15 inches of clearance from its centerline to any side obstruction — including a wall, vanity, or shower — and at least 21 inches of clearance in front. The Ontario Building Code specifies a minimum of 380 mm (about 15 inches) of clear space in front of a water closet. Planning your shower with these clearances in mind keeps the bathroom comfortable to move around in and helps your project pass inspection. We factor this into the layout from the start so your new shower fits the space properly.

Doorless and Walk-In Showers: Open Design Without the Mess

Doorless, walk-in showers are a beautiful, accessible option — but a common question is how they keep water from ending up all over the floor. The answer comes down to thoughtful design rather than a glass door:

• Adequate size and depth — A doorless shower is built large enough that water has room to fall and drain before it reaches the opening.
• Proper floor slope — The shower floor is sloped toward the drain so water flows away from the entrance, not toward it.
• Strategic showerhead placement — The showerhead is positioned to spray away from the opening, keeping water contained.
• An offset entry or partial wall — A longer entryway, angled wall, or partial glass panel blocks splashing while keeping the open feel.
• Effective drainage — A well-placed drain (or a linear trough drain) quickly carries water away before it can spread.

When these elements are designed and installed correctly, a doorless shower stays just as dry outside the wet zone as a traditional enclosed one. Getting that balance right is exactly the kind of detail professional installation accounts for.

Why Choose Waterworks Plumbing & Drains

A shower installation touches plumbing, drainage, and waterproofing all at once, so you want a team that handles every piece with care. That is what we aim to deliver:

• Complete service — We manage the full installation, from planning and plumbing through to the final fixtures.
• Proper waterproofing and drainage — The parts you cannot see are the parts that protect your home, and we never skip them.
• Honest, transparent guidance — We help you choose the right shower for your space and budget, with clear options and no pressure.
• Local to Etobicoke — Based at 1212 The Queensway, we are part of the community we serve and easy to reach.

Shower installation is one part of our wider expertise. We are a full-service residential plumbing team, so we can handle related upgrades and any plumbing your bathroom project requires under one roof.