Yes, we handle all types of bathroom faucet and showerhead repairs, whether it is a steady drip, inconsistent water pressure, or temperature control issues. Leaks are more than just an inconvenience. They waste water, can cause mineral buildup, and eventually lead to fixture damage. Most often, the problem comes from worn internal parts like cartridges, washers, or valve seats. We begin by identifying the make and model of your fixture so we can match the correct replacement parts. Once we open the fixture, we clean the surfaces, replace worn components, and reseal everything to factory standards. In some cases, especially with older fixtures or those with internal corrosion, we may recommend a full replacement for better performance and long-term savings. Our goal is always to fix the problem completely and prevent it from coming back.

There are several indicators that suggest a toilet should be replaced. These include visible cracks in the porcelain, constant running despite repair attempts, frequent clogs, or reduced flushing power. Older models may also use much more water than modern efficient designs, which can impact both your water bill and environmental footprint. When we inspect a toilet, we look for signs of structural wear, water damage around the base, and how effectively the unit flushes. We also test for slow leaks using simple but effective dye tests. If a repair is possible and makes financial sense, we will recommend it. However, if the toilet is outdated or inefficient, replacing it with a high-efficiency model will give you better results and fewer service calls in the future. We help you choose a reliable model that fits both your space and style preferences.

Yes, we regularly convert standard tubs into walk-in showers for homeowners looking for convenience, accessibility, or a modern bathroom upgrade. This process involves removing the old bathtub, adjusting the plumbing to fit a new shower drain, and modifying the supply lines as needed. We ensure the floor has the proper slope for drainage and that all work is done to code. We also upgrade the shower valve and controls during the conversion and install serviceable shut-off points behind the wall when possible. Depending on the design, we can incorporate options like low-threshold bases, slip-resistant flooring, built-in seating, and grab bars for safety. These conversions add function and value to your home and are especially beneficial for aging-in-place planning. We work with your designer or contractor as needed to ensure everything comes together smoothly.

A rough-in is the stage of plumbing installation where we lay out all the water supply and drain lines before walls, floors, or fixtures are finished. It is typically done during a new build or major remodel. For bathrooms, rough-ins include precise placement of pipes for sinks, toilets, tubs, or showers. This step determines how the final fixtures will connect, and it is essential that everything be properly aligned and sloped according to code. For example, the toilet drain usually needs to be twelve inches from the finished wall. A well-executed rough-in also ensures that you have easy access to shut-offs and cleanouts down the line. Mistakes at this stage can lead to costly changes later, so we take precise measurements and double-check against your layout plans before completing this step. Proper rough-in work is the foundation of a reliable plumbing system.

If your toilet continues to make noise after flushing, there may be a problem with the fill valve, the flapper, or the water pressure in the line. Common issues include a fill valve that is not shutting off properly, air in the pipes, or a leaking flapper that causes the tank to refill continuously. We start by checking the internal components and testing how quickly and evenly the tank refills. In some cases, sediment in the valve or aging rubber parts can cause irregular function. We clean out any buildup and replace worn parts with high-quality replacements to ensure smooth operation. If the sound is coming from water pressure surges or hammering, we may recommend pressure regulation or the installation of a hammer arrestor. Persistent toilet noise is more than a nuisance. It can waste water and indicate deeper problems with your plumbing that should be addressed promptly.

Yes, we clear clogged sinks and tubs using professional tools that are safe for your plumbing. These types of clogs are often caused by hair, soap scum, toothpaste, and other residue that builds up over time. We start with a basic inspection of the trap and use a manual or motorized auger to remove the obstruction. If the clog is deeper in the pipe, we can use a mini drain camera to locate the blockage and determine the best way to clear it. We do not rely on harsh chemicals, which can damage pipes and often only provide temporary relief. After clearing the drain, we rinse the line thoroughly and can provide enzyme-based treatments to help keep the drain clean longer. We also offer advice on how to prevent future clogs, such as using drain covers and avoiding heavy oils or debris from going down the drain.

Odors from bathroom sinks are usually caused by buildup in the drain or a dry trap that is no longer blocking sewer gas. First, we check that the P-trap contains water and is not leaking. If the trap is dry, running water for a few minutes may be enough to resolve the issue. If that does not solve the problem, the odor may be coming from biofilm inside the drainpipe. In that case, we perform a thorough cleaning using specialized tools and disinfectants designed to remove organic material and bacteria. In more persistent cases, we may disassemble the trap and clean it manually or flush the line with an enzymatic cleaner that breaks down buildup over time. We also check that your venting system is functioning properly since poor air flow can draw unpleasant smells back into your bathroom. Once cleaned and properly maintained, odors should not return.