How to Clean the Sump Pit

Home / Plumbing Advice / How to Clean the Sump Pit

Posted by:   In: Plumbing Advice, Plumbing Tips, Sump Pumps  Tags: , , ,

How to Clean Sump Pit

While sump pumps receive a lot of attention, sump pits don’t. The sump pit has to be given the same importance you would give to your sump pump. It is critical if you want the sump pump to do its duty optimally. You should clean the sump pit once a year at least. Here are a few steps on how to clean the sump pit.

The sump pit should be isolated

Before you go about cleaning the sump pit, disable the sump pump. Disconnect the power and remove its connection to the discharge pipe.

Lighting

Before you clean the sump pit, make sure that there is adequate lighting around.

Put the sump pump into a bucket

Place the sump pump in a bucket, if you are able to find one that is large enough. It is recommended that you take the pump outside to clean it, as you may not want to dirty the house in the process.

Remove water from the pit

Using a vacuum, remove any standing water from the sump pit. There may be sludge and you will have to scrape this out as well. The sludge might give off a nauseous smell, so make sure that there is adequate ventilation.

Clean the pump

Clean the pump as well as you can. Reconnect the pump with the discharge line. If the pump is boxed in and you open it, any warranties may become void. So be careful.

Reactivate the pump

Attach the power line to the pump. Next, reactivate the drainage system.

 

If you’re in need of a Markham Plumber to give you tips on sump pump maintenance. Contact WaterWorks Plumbing in Toronto at (416) 489-0000 to schedule an appointment!